ONE-STOP SOLUTION PROVIDER FOR THE FOOD INDUSTRY
What Should I Do If the Weather Is Too Hot in Summer and My Appetite Is Poor? A plate of crystal-clear and delicious pork skin jelly can activate your taste buds! Pork skin jelly has become an indispensable dish on people's tables in hot summer weather, thanks to its smooth texture and delicious flavor. Only one pork skinning machine is needed to remove the whole pigskin, which becomes the best raw material for making pork skin jelly. Next, OrangeMech will teach you how to make pork skin jelly from pig skin with the help of a pork peeling machine.
A Pork Peeling Machine is a special piece of equipment for meat processing, which is suitable for separating the skin from boneless meat such as pork belly and hind leg meat. It is often used in meat processing factories, central kitchens, and fresh food stores. The pedal switch is used to control the cutting and peeling action of the alloy steel knife roller, and the peeling thickness can be adjusted.
The whole machine is mostly made of 304 stainless steel, with a simple structure, easy cleaning, and a high degree of automation. Compared with manual peeling, it offers higher efficiency, uniform peeling, less skin loss, reduced human contact, improved food safety, simple operation, and greatly reduced labor costs.
Place the pork peeling machine on a flat surface, and check that the blade, pressure roller, and protective cover are intact and that the power cord is properly grounded. Turn the adjusting handwheel to set the peeling thickness. Select boneless meat with skin that has a moderate texture, clean the surface impurities, and perform a no-load test run to confirm that there is no abnormal sound.
Wear cut-resistant gloves. After starting the machine, place the meat piece smoothly on the feeding table with the skin facing down, allowing gravity to feed it into the rotating knife roller. Press the pedal switch to activate the cutter shaft and remove the skin, then discharge the meat and skin separately. During operation, keep your hands away from the cutter roller area, and press the emergency stop button immediately in case of jamming.
Turn off the power supply after processing, clean up the meat scraps and residues in time, and clean and disinfect the whole machine. Be sure to cut off the power before cleaning. Check blade wear and perform regular equipment maintenance. It is forbidden to process frozen meat with bones or other hard materials to prevent the blade from being damaged.
Turn the body adjustment handwheel to adjust the gap between the knife roller and the pressure roller, controlling the peeling thickness and grease retention within the adjustable range. Turning the handwheel clockwise decreases the clearance, leaving less fat on the meat; turning it counterclockwise increases the gap, allowing more fat to remain. After adjustment, try cutting a small piece of meat to check the result and fine-tune the setting as needed.
The pedal switch controls the machine's start and stop: when the pedal is pressed, the conveying roller and the knife roller start to run; when the pedal is released, the equipment stops feeding immediately. Place the pedal on the ground where it is easy to operate, and check that the pedal circuit is not damaged, responds properly, and has no delays or sticking. This machine has no feed speed regulating function, and the feed speed is fixed.
Install the protective cover and reset the emergency stop button. No-load test: lightly step on the pedal to check whether the knife roller turns correctly. Release the pedal, and the machine should stop immediately. Key points of operation: place the meat pieces firmly before pressing the pedal. Releasing the pedal during feeding will pause the machine. Keep your hands away from the knife edge, and release the pedal immediately if necessary.
500 g pigskin, 1,500–1,800 ml clear water, 3–4 slices of ginger, onion, 2 tablespoons of cooking wine, and a little salt. Optional spice: 1 star anise.
1). Treatment of Pigskin: Put the pigskin in cold water, add ginger slices and cooking wine, and boil for 10 minutes. Remove the pigskin. Scrape off all the fat from the inner side of the skin (fat is the main cause of cloudy broth), remove the pig hair, and cut the skin into thin strips.
2). Cleaning and Degreasing: Repeatedly rub the cut pigskin strips with warm water until the water becomes clear.
3). Boiling: Add the pigskin, clear water, ginger slices, and onion segments to a pot, and simmer over low heat for 1.5–2 hours. Skim off the oil halfway through cooking.
4). Seasoning and Filtering: Remove the onion and ginger, add an appropriate amount of salt, and mix well. Filter the soup through a strainer and pour it into a container.
5). Refrigeration and Solidification: After cooling, place the container in the refrigerator for 4–6 hours and allow the mixture to solidify completely. When serving, cut the pork skin jelly into pieces and dip them in garlic paste and soy sauce with a little vinegar.
Choosing OrangeMech's pork peeling machine is an ideal solution for reducing costs and increasing efficiency in meat processing. The whole machine is made of 304 food-grade stainless steel. The pedal-controlled semi-automatic operation is simple and safe, and the peeling thickness is accurate and adjustable. The alloy steel blades are sharp and wear-resistant, and the skin and meat are separated effectively, which greatly reduces raw material loss and ensures uniform and stable results. The equipment is easy to disassemble and clean, with no hard-to-clean areas, making it suitable for processing all kinds of boneless fresh meat. We provide reliable quality, comprehensive after-sales service, and technical support to help factories save labor costs, improve production capacity, and support their meat processing operations.
OrangeMech's pork skinning machine can efficiently complete the pretreatment of pigskin, making it ideal for producing commercial and homemade pork skin jelly. It can remove excess grease while retaining clean pigskin, solving the problems of residual grease and uneven appearance caused by manual peeling. The whole machine is made of food-grade stainless steel, making it hygienic and easy to clean. It is also safe and convenient to start and stop using the foot pedal, with thorough peeling and minimal material loss. By following the standard pork skin jelly recipe, including blanching, slow cooking, and refrigeration, the finished product becomes clear, transparent, springy, and non-greasy. This not only improves ingredient utilization and product value but also greatly increases processing efficiency, saves labor costs, and enables standardized, high-quality production.
Contact Person:Karen
Tel: +86 13323958325
ADD:
No. 1016, Dahe Garden, Taihangshan Road, Yancheng District, Luohe City, Henan Province